SERIOUS SOLUTION FOR SERIOUS PROBLEMS!

A Waterworks Industrial water softener will eliminate the build up of lime scale in your pipes and on heating elements found in industrial hot water and heating systems as well as equipment including industrial dishwashers, glass washers and washing machines, leading to fewer expensive engineer call-outs and replacement parts.

There are additional benefits to installing a water softener such as :-

Saving money:-You can expect a reduction of up to 50% in the amount of detergents, soaps and shampoos that you use, and it will also eliminate the need to use salt in most dish and glass washers with glasses and crockery drying without spotting or streaking.

Saving time:-There will be no more build up of scale in hot water and heating systems leading to less time being spent cleaning sinks, basins, baths, showers and taps etc.

A Waterworks Industrial water softener will reduce existing limescale in your pipes by dissolving and washing away all the scale, returning your system to its original condition.

Hard water is generally responsible for the scum, scale and tide marks found around sinks, basins, baths and also furred up elements. These are the visible signs of hard water, however, there are more unseen and potentailly costly examples of hard water-clogged pipes.

Hard water is more commonly found in central, Eastern and Southern regions of the country.

Official government figures graphically show the potential cost of hard water.

Only 1.5mm of scale reduces the efficiency of boilers by almost 10%.

Simplex systems

Simplex softeners are best suited to situations where moderate total water consumption and consistent demand are factors. The regeneration of Simplex units is controlled either by a metered or timed control valve.

Simplex units regenerate at a convenient period of low water usage normally during the night.

Single column control valves will bypass hard water to service unless a bypass close down facility is specified during regeneration.

Simplex softeners will need to be sized to give at least one days soft water output before regeneration.

Duplex systems

Duplex softeners use two resin columns linked with a multi port valve and are designed to give a continuous supply of softened water. Whilst one column is supplying softened water, the second is either regenerating or is in standby. The water flow in the system is metered so that when one column is exhausted, standby column switches to supply softened water, allowing the exhausted column to regenerate and go to standby mode.

Duplex softeners can be regenerated every four hours if required but are normally sized to give one regeneration per column per day.

Because Duplex systems can regenerate up to six times a day, this enables a smaller system to be employed that would be required in a simplex system.

SOLUTIONS FOR ALL:

INDUSTRIAL WATER SOFTENER SYSTEMS CAN BE TAILOR MADE TO MEET YOUR REQUIRMENTS PLEASE CONTACT US FOR MORE INFORMATION.

•  HOTELS

•  CARE HOMES

•  HOSPITALS

•  CAR WASHES

•  STEAM BOILERS

•  LAUNDRYS

•  SCHOOLS/COLLEGES

•  RESTAURANTS

•  FOOD PROCESSING

•  OFFICE BUILDINGS

•  BEAUTY SALONS

•  PUBLIC HOUSES

•  GUEST HOUSES